Double Glazing Locks Repair
When a double glazing window won't close it causes draughts and allows heat to escape. This also weakens the security of your home and puts you at a greater chance of being burglarized.
Double-glazed window seals, hinges, and handles can become damaged over time. If this happens, it could affect the way your windows function and void any warranty you may have.
Locks that aren't working
Many people install anti-burglar devices on their main gates and doors however, they forget that windows are the most frequent targets for burglars. Poorly secured locks can cause drafts, allow valuable heat escape, and reduce the security of your house.
If you find that your uPVC window locks aren't working, there is likely that the lock mechanism has become blocked. This usually occurs due to a split in the gearbox component. This can cause the handle not to open, but instead to rotate 360 degrees. This is a problem that is common with uPVC windows, however it can also occur in tilt-and turn windows and sliding sash windows.
If Uxbridge double glazing happens, you'll be able to unlock the lock by pressing the lever handle. This can be used to unblock the gearbox and then restore the window's opening. If this does nothing, you may have to replace the entire mechanism for locking windows.
Most modern uPVC windows use espagnolette locks. These are internal locking systems which secure the window by using mushroom-shaped locking cams inserted into the frame keep. The handle operates the gearbox which then activates the cams, causing them to move up or down. A common issue is when the spindle on the lock has been damaged, causing the handle to move freely but not allowing the window to move open or shut.
A faulty transmission can also make your window appear to be locked but it's not. This is because the rods that are the center, also known as crocodile teeth fixings in the gearbox snap off. If this is the case, Misty Glaze can supply and fit replacements for these rods in order to restore the function of your window.
It is essential not to force a stuck or broken lock. This can cause the lock to break or snap - especially with a uPVC window because it expands and contracts as it warms and cools. To avoid this issue, you should call a locksmith professional to identify the problem and fix it.
Sticky Doors/Window
Sticking doors and windows are a serious annoyance but they can be a sign of more significant structural problems. It is important to seek professional help if you have difficulty opening or closing a door or window. The problem could result from a variety of reasons like foundation settlement or a lack of support in the crawl space.
Frame or humidity issues could cause windows and doors to stick. When exposed to moisture, wooden frames can begin to warp. Even if your hardware appears great, this could make it difficult to open and close your frames. The wood expands when this happens, and it is pushed up against the hinges, causing friction.
Rub the window or door with soap to lessen friction if it gets stuck in summer. This will make it less swollen and could solve the issue temporarily. This method may need to be repeated periodically during periods of high humidity.
A more permanent fix involves sanding the door or window frame to give it a smooth finish. This can be done by hand or using the power tool. A professional can also sand and paint or stain your frame or door to make it appear new once more.
If the sanding and soap don't help it's likely the issue is due to foundation settlement or a weak crawl space. Check for cracks in the area. If you notice these indications, you need to call in an expert in foundation repair. Damage to the foundation can result in uneven floors, misaligned walls and doors that are stuck. It is important to take care of these issues as soon as you can to avoid expensive and dangerous repairs in the future. These issues could escalate until your home becomes structurally unstable if left unattended. Contact the Southeast's leading foundation repair specialists today to set up an inspection and repair service!
Cracking/Blowing Issues
Cracks can appear when double glazing begins to break down. This can be ugly and it also allows all the heat that has been built up in your home to escape. This could also pose a safety threat for your family members as the glass pieces can cause injuries in the event of a break. It is recommended to fix any double-glazing window with a crack before they get any worse. This can increase the cost of replacement.
Window seals are vital to stop drafts from entering your home and keep air in between your window panes. However, over time, they may become damaged or shrink due to weather changes. Unchecked, it can cause condensation, moisture and draughts inside your home.
A professional can usually solve this issue. They can replace the seal on your window and bring your windows back to their original state. They can also recommend additional features that will decrease the chance of a stress fracture occurring in the future, like trickle vents for better ventilation.
It is also possible to lubricate the handles and hinges on your doors and windows. This will enable them to move more smoothly and will allow the lock to function as it should. Rub lubricating oils onto a lint-free cloth and rub them into the hinges or handle mechanism, as well as places where they pass through frames (for example for sash window). You can also remove the handles and wash them in warm soapy water to remove any dirt or grit.
It is essential to speak with an expert if your uPVC windows and doors aren't working as they should. They can identify the problem quickly, and then repair it in a brief time. It's much safer and cheaper than trying to fix the issue yourself and potentially damaging the mechanism. It will also give you peace of mind knowing that your home is secure and safe.